Sunglo Patio Heater Specifications:
| Height: |
41.25 inches |
| Reflector Diameter: |
34" |
| Burner Materials: |
Heavy duty series 430 stainless steel |
| Emitter Grid Materials: |
Heavy duty series 430 stainless steel |
| Fasteners: |
Series 304 stainless steel |
| Finish Colors: |
Black Decorative Mount with Stainless Head |
| BTU Input/Hour: |
50,000 BTU/Hour |
| Reflector Clearances: |
18" from top - 24" to the sides |
| Base Diameter: |
N/A |
| Net Weight: |
66 pounds |
| Circle of Heat: |
Varies 18 feet - 20 feet
(Will vary based on wind chill factor, prevailing winds, location of heater, wind protection) |
| Burn Time: |
Constant Supply (Natural Gas) |
| Gas Supply: |
The unit is designed for natural gas fuel with propane upon request |
| Safety Systems: |
100% safety shut-off, Direct Spark Igniter (DSI) or 24 Volt Control |
| Product Approval: |
CSA Design Certified |
| Installation: |
Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders. Click here for Owner’s Manual. (pdf 2.8MB) |
| Warranty: |
One year Warranty |
* Switchable electrical supply required for 24 volt control
| Height: |
93" |
| Reflector Diameter: |
34" |
| Burner Materials: |
Heavy Duty series 430 stainless steel |
| Emitter Grid Materials: |
Heavy Duty series 430 stainless steel |
| Fasteners: |
Series 304 stainless steel |
| Finish Colors: |
Black or Stainless Steel |
| BTU Input/Hour: |
50,000 BTU/Hour |
| Reflector Clearances: |
36" from the top, 24" from all sides |
| Base Diameter: |
3" set in 9" diameter of concrete (contractor supplied) |
| Net Weight: |
70 pounds |
| Heating Area: |
Varies 20 feet
(will vary based on wind chill factor, prevailing winds, location of heater, wind protection) |
| Burn Time: |
Constant supply on Natural Gas |
| Fuel Supply: |
Natural Gas only |
| Safety Systems: |
100% safety shut-off, optional 24 volt control |
| Product Approval: |
CSA Design Certified |
| Installation: |
Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders. Click here for Owner’s Manual. (pdf ) |
| Warranty: |
One year Warranty |
| Height: |
93" |
| Reflector Diameter: |
34" |
| Burner Materials: |
Heavy Duty series 430 stainless steel |
| Emitter Grid Materials: |
Heavy Duty series 430 stainless steel |
| Fasteners: |
Series 304 stainless steel |
| Finish Colors: |
Black or Stainless Steel |
| BTU Input/Hour: |
50,000 BTU/Hour |
| Reflector Clearances: |
36" from the top, 24" from all sides |
| Base Diameter: |
20.5" |
| Net Weight: |
66 pounds |
| Heating Area: |
Varies 18 feet to 20 feet
(will vary based on wind chill factor, prevailing winds, location of heater, wind protection) |
| Burn Time: |
Constant supply on Natural Gas |
| Fuel Supply: |
Natural gas only |
| Safety Systems: |
100% safety shut-off, Direct Spark Ignition (DSI) |
| Product Approval: |
CSA Design Certified |
| Installation: |
Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders. Click here for Owner’s Manual. (pdf ) |
| Warranty: |
One year Warranty |
| Height: |
90 inches |
| Reflector Diameter: |
34" |
| Burner Materials: |
Heavy duty series 430 stainless steel |
| Emitter Grid Materials: |
Heavy duty series 430 stainless steel |
| Fasteners: |
Series 304 stainless steel |
| Finish Colors: |
Three stock finishes: Stainless Steel, Black and Antique Bronze, Three special order finishes: White, Gray and Forest Green |
| BTU Input/Hour: |
40,000 BTU/Hour |
| Reflector Clearances: |
18" from top - 24" to the sides |
| Base Diameter: |
N/A |
| Net Weight: |
72 pounds (not including cylinder) |
| Circle of Heat: |
Varies 18 feet - 20 feet
(Will vary based on wind chill factor, prevailing winds, location of heater, wind protection) |
| Burn Time: |
+10 hours on high setting (12 - 15 on low & medium) |
| Gas Supply: |
Propane Gas only |
| Safety Systems: |
100% safety shut-off, Direct Spark Igniter (DSI) |
| Product Approval: |
CSA Design Certified |
| Installation: |
Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders. Click here for Owner’s Manual. (pdf 2.8MB) |
| Warranty: |
One year Warranty |
|
